Iso-Sep 25HD & 25F – Rubber Isolation Pads

$467.28$622.37

Clear

Description

Iso-Sep 25HD (High Dimple) & 25F (Flat) – Rubber Isolation Pads

Iso-Sep 25 Rubber Isolation Pads are made from 92% recycled automotive tires bonded with a permanently elastic polyurethane binder; the tire rubber is 100% post-consumer content. It does NOT contain PVC or formaldehyde and meets established Indoor Air Quality (IAQ) standards. The Iso-Sep 25 screed isolation mat can aid specifiers by potentially contributing towards earned LEED (NC-CI-EB) points. Iso-Sep 25 is extremely easy to install. No training or special equipment is required. Roll it out, cut to fit, tape all seams, services and other penetrations and pour the concrete.

Iso-Sep 25HD is a one-inch dimpled one-side isolation mat that can be installed directly under concrete. The dimpled geometry reduces the contact area with the primary structural building components by over 90% while still maintaining even support and load capabilities. Floor assemblies constructed with Iso-Sep 25HD will produce a low-profile Sound Rated floor system. One layer of Iso-Sep 25HD below a 6-inch  concrete slab achieves an STC rating of 69 and an IIC rating of 62. At allowable loading, one layer of Iso-Sep 25HD has a natural frequency of 13Hz. Two layers of Iso-Sep 25HD below a 6-inch concrete slab achieves an STC rating of 72 and an IIC rating of 64. At allowable loading, two layers have a natural frequency of 10Hz. Iso-Sep 25HD can maintain loading to 1,020 lbs/ft2. With loading by application up to 2,040 lbs/ft2 .

Iso-Sep 25F is 1 inch flat on both sides isolation mat, typically used in heavier load applications. For example; foundation footings, isolation piers and inertia bases. One layer of Iso-Sep 25F loaded between 20-40 PSI will exhibit a natural frequency of 13 Hz. Three layers of Iso-Sep 25F loaded between 20-40 PSI will exhibit a natural frequency of 8 Hz.

Physical Properties:

Iso-Sep 25HD:

Weight/sq. ft. – 2.2 lbs

Roll weight – 145 lbs

Roll Dimensions – 48″ x 15′

Thickness – 1.0″

Type-A-Hardness (ASTM D2240) – 30 Durometer

Iso-Sep 25F:

Weight/sq. ft. – 3.3 lbs

Roll weight – 198 lbs

Roll Dimensions – 48″ x 15′

Thickness – 1.0″

Type-A-Hardness (ASTM D2240) – 30 Durometer

Applications:

Floating Mechanical Room Floors, Housekeeping Pads, Transformer Pads, Gym Room Floors, Commercial Building & Convention Center Floors, Helicopter Pads, Roof Top Isolation Pads, Underlay for click together Engineered Hardwood, Underlay for click together Laminate Floors, ect.

Additional information

Product

Iso-Sep 25F, Iso-Sep 25HD