Resilmount A237R Sound Isolation Clips

Description

Resilmount A237R™ Sound Isolation Clips

The Resilmount A237R™ is a vibration absorbing and sound Isolation Clips that is an affordable & reliable sound solution that can be used on wood and steel wall stud as well as ceiling joist applications. The Resilmount patented thermoplastic rubber outperforms standard rubber because of its unique natural absorbing characteristics. The Resilmount A237R™ exclusive sound cell design safeguards against structure borne vibrations transferring into the body of the Resilmount because of its strong column design providing a small percentage of contact surface area with the structure or substrate it is fastened to. This aids in absorbing and breaking up airborne sound at the transfer point.

Features:

• Engineered thermoplastic rubber outperforms standard rubber because of its sound absorbing characteristics.
• Can be used with any wood, steel, CMU or concrete application.
• Decouples gypsum board from the structure.
• Is UL approved in 84 wall and ceiling assemblies.
• Has consistent and reliable quality – manufactured under ISO 9001 quality control system.
• Is a cost effective way to isolate airborne noise.
• Can be used to suit 7/8” and 1 1/2” furring channels.
• Provided with a 1/4” hole for a variety of fasteners.

Specifications:

Clip Height – 1 1/8”

Metal Thickness – 0.047”

Clips width x length – 1 3/8” x 3 1/8”

Height of Rubber – 3/8”

Projection: – 1 5/8″ from supporting structure when 7/8″ furring channels are used

Installation Notes:

• A237R is to be fastened to structure with a minimum #8 screw or approved masonry anchor with a minimum pullout of 120 lbs

• Maximum dead load capacity 55 lbs with 25 gage, hemmed edge furring channel

• Maximum suggested load for acoustic applications is 36 lbs

• Maximum spacing of clips along furring channel is 48”

• Space between furring channels is not to exceed 24” for walls & 16“ for ceilings. Consult local code for the assembly being built.

• For Fire Rated assemblies the A-300 Steel Washer MUST be installed as shown or the clips do not have a fire rating. These washers are included in every box of A237R clips.