GenieMat FIS is manufactured with re-claimed rubber and is formulated with high damping polymers making it a “green” product for LEED projects. The GenieMat FIS is manufactured to carefully controlled density standards for trusted, long term service.

GenieMat FIS is impervious to water, most chemicals, and temperature change. GenieMat FIS will not rot or support mold.

GenieMat FIS can be installed with mechanical fasteners, polyurethane based construction adhesives, or a variety of thin-sets and mortars. GenieMat FIS anchor washers are available.

Benefits:

• Factory slit to width and easily field cut to length with utility knife.
• Unlike fiberglass it is not affected by moisture.
• Used for both top and bottom plates.
• Can be used for a wide range of loadings (1-50 psi).
• Continuous resilient support of partition.
• Unaffected by water.
• Will not support mildew or mold growth.
• Can use mechanical fasteners or adhesives (PSA available)

Product Specifications:

5 mm (3/16″) thick x 80 mm (3.25″) wide x  9.14 m (30′) long

5 mm (3/16″) thick x 133 mm (5.5″) wide x  9.14 m (30′) long

10 mm (1/2″) thick x 80 mm (3.25″) wide x  4.57 m (15′) long

10 mm (1/2″) thick x 133 mm (5.5″) wide x  4.57 m (15′) long